NEOiD Mic to Dante
Converts two microphones or line sources to the Dante network, with 10 to 40 dB preamp, +48 V phantom and PoE.
- Simultaneous channels
- 2 inputs
- Analog inputs
- 2× XLR/TRS combo
- Maximum input level
- 15 dBu (balanced)
- THD+N
- ≤ 0.005% @ 12 dBu, 1 kHz
Overview
The NEOiD Mic to Dante turns any microphone into a Dante source. It has two channels with combo XLR/TRS connectors that accept microphone or line, with adjustable preamp gain from 10 to 40 dB per channel and switchable +48 V phantom power for condenser microphones. The 3.5 mm headphone output allows you to listen to the input or the Dante network return. Powered via PoE (802.3af/at) or 12 V DC adapter, it works with a single network cable and operates with 24-bit audio, compatible with AES67.
Features
- 2 channels
- Gain from 10 to 40 dB
- Phantom +48 V
- PoE
Technical specifications
Operation mode
- Operation mode
- Analog → Dante
- Simultaneous channels
- 2 inputs
Audio inputs
- Analog inputs
- 2× XLR/TRS combo
- Microphone gain
- 10 to 40 dB per channel (EIN −115 dB)
- Phantom power (+48 V)
- Yes
- Maximum input level
- 15 dBu (balanced)
- Input impedance
- 20 kΩ balanced · 10 kΩ unbalanced
Audio performance
- THD+N
- ≤ 0.005% @ 12 dBu, 1 kHz
- Noise floor
- −86 dBu (10 dB gain) · −84 dBu (26 dB) · −75 dBu (40 dB), with the Dante to Line
- Frequency response
- 20 Hz – 20 kHz (±1 dB)
- Signal-to-noise ratio
- ≥ 96 dB at 10 to 26 dB gain (98 dB at 10 dB) · 87 dB at 40 dB
- Crosstalk
- ≥ 70 dB
Network & Dante
- Dante port (RJ-45)
- 1× RJ-45 (100 Mbps)
- PoE (Power over Ethernet)
- Yes
- Sample rate / bit depth
- 44.1 / 48 / 88.2 / 96 kHz · 24-bit (44.1 and 88.2 kHz with a firmware update)
- Dante latency
- 1, 2 or 5 ms (via Dante Controller)
- AES67
- Yes
Control & monitoring
- Controls
- Per-channel gain · +48 V phantom · monitor select and volume
- Monitor selection
- Input or Dante network
- Headphone output (3.5 mm TRS)
- 30 mW @ 32 Ω (stereo)
- LED indicators
- Power · Link/Act · Speed · Phantom
Physical & power
- Power
- PoE (802.3af/at) or DC 12 V
- Power consumption
- ≤ 1.5 W
- Weight
- 0.25 kg
- Dimensions (W × H × D)
- 109 × 70 × 36 mm
- Operating temperature
- −10 °C to 50 °C
Compare with products in the same category
| Compared item | NEOiD Mic to Dante | NEOiD Line to Dante | NEOiD Dante to Line | NEOiD Dante to USB |
|---|---|---|---|---|
| Summary | Converts two microphones or line sources to the Dante network, with 10 to 40 dB preamp, +48 V phantom and PoE. | Takes two line audio channels to the Dante network, with combo XLR/TRS inputs and PoE power. | Converts two Dante network channels into two balanced analog XLR outputs, with PoE power. | Connects the computer to the Dante network via USB port, with 2 × 2 channels and no driver installation. |
| Operation mode | Analog → Dante | Analog → Dante | Dante → Analog | USB ↔ Dante |
| Simultaneous channels | 2 inputs | 2 inputs | 2 outputs | 2 × 2 (USB) |
| Analog inputs | 2× XLR/TRS combo | 2× XLR/TRS combo | not provided | not provided |
| Maximum input level | 15 dBu (balanced) | 15 dBu (balanced) | not provided | not provided |
| Published files | no files | no files | no files | no files |
Need help with this product?
Open a ticket and our support team takes it from here. Include the model and, if you have it, the device serial number.
Describe the problem now; to send it, sign in or create an account.