NEOiD Dante to USB
Connects the computer to the Dante network via USB port, with 2 × 2 channels and no driver installation.
- Simultaneous channels
- 2 × 2 (USB)
- Dante port (RJ-45)
- 1× RJ-45 (100 Mbps)
- Dante latency
- 1, 2 or 5 ms (via Dante Controller)
- Headphone output (3.5 mm TRS)
- 15 mW @ 32 Ω (stereo)
Overview
The NEOiD Dante to USB connects the computer to the Dante network through a USB-B port, without a dedicated sound card and with no driver installation. It sends PC audio to the Dante network and receives the return, with 2 × 2 channels, and works on Windows, macOS and Linux. The 3.5 mm headphone output, with selection between PC and Dante network, lets you check the signal on the spot. It is powered by USB itself or by a 12 V DC power supply and operates with 24-bit audio, compatible with AES67.
Features
- 2 × 2 channels
- Driverless USB
- USB powered
- AES67
Technical specifications
Operation mode
- Operation mode
- USB ↔ Dante
- Simultaneous channels
- 2 × 2 (USB)
Network & Dante
- Dante port (RJ-45)
- 1× RJ-45 (100 Mbps)
- Sample rate / bit depth
- 44.1 / 48 / 88.2 / 96 kHz · 24-bit (44.1 and 88.2 kHz with a firmware update)
- Dante latency
- 1, 2 or 5 ms (via Dante Controller)
- USB audio (USB-B)
- Yes — USB 2.0, UAC 1.0, driverless (Windows 7 / 8 / 10 / 11, macOS 10.6.4+, Linux 2.6.0+)
- AES67
- Yes
Control & monitoring
- Controls
- Monitor select and volume
- Monitor selection
- PC or Dante network
- Headphone output (3.5 mm TRS)
- 15 mW @ 32 Ω (stereo)
- LED indicators
- Power · Link/Act · Speed
Physical & power
- Power
- USB or DC 12 V
- Power consumption
- ≤ 1.5 W
- Weight
- 0.20 kg
- Dimensions (W × H × D)
- 109 × 70 × 36 mm
- Operating temperature
- −10 °C to 50 °C
Compare with products in the same category
| Compared item | NEOiD Dante to USB | NEOiD Dante 16×16 | NEOiD Dante 8×8 | NEOiD Mic to Dante |
|---|---|---|---|---|
| Summary | Connects the computer to the Dante network via USB port, with 2 × 2 channels and no driver installation. | Dante interface with 16 analog inputs and 16 outputs to integrate analog equipment into the network. | Dante interface with 8 analog inputs and 8 outputs to integrate analog equipment into the network. | Converts two microphones or line sources to the Dante network, with 10 to 40 dB preamp, +48 V phantom and PoE. |
| Operation mode | USB ↔ Dante | not provided | not provided | Analog → Dante |
| Simultaneous channels | 2 × 2 (USB) | not provided | not provided | 2 inputs |
| Dante port (RJ-45) | 1× RJ-45 (100 Mbps) | not provided | not provided | 1× RJ-45 (100 Mbps) |
| Sample rate / bit depth | 44.1 / 48 / 88.2 / 96 kHz · 24-bit (44.1 and 88.2 kHz with a firmware update) | not provided | not provided | 44.1 / 48 / 88.2 / 96 kHz · 24-bit (44.1 and 88.2 kHz with a firmware update) |
| Dante latency | 1, 2 or 5 ms (via Dante Controller) | not provided | not provided | 1, 2 or 5 ms (via Dante Controller) |
| Published files | no files | no files | no files | no files |
Need help with this product?
Open a ticket and our support team takes it from here. Include the model and, if you have it, the device serial number.
Describe the problem now; to send it, sign in or create an account.